The 737-300's were soon available with EFIS, an option which most operators took. The EADI included a speed tape, radio altimeter, groundspeed indicator, and FMA annunciations. The EHSI has a selectable display either to represent the old HSI or a moving map display. See navigation section for details. 737-300 EFIS Captains flight instruments Hi, A question to the Twin Otter experts: I took a photo of the instruments on a flight with the Twin Otter in Maldives some years ago. If I fly with the same power settings, I get pretty the same values. Only GG RPM is way off. While on Maldives it was near 100%, I only get 72% in the simulator (P3D 5.3). The Jabiru range of aircraft is popular with the recreational flyer, flight training and cross country flying. With features such as dual controls, in-flight adjustable trim, electric flaps, cabin heat and full featured GPS and EFIS/EMS systems, this aircraft will take you anywhere with ease and comfort. 600-6 GENERAL AVIATION TIRES 600-6 General Aviation Tires There are seemingly shortages of everything these days and Airbus says it’s now effectively sold out of A321neo airliners. U.S. private equity fund Indigo Partners placed an order for 255 of the aircraft on the opening day of the Dubai Airshow on Sunday. At the announcement, Airbus CCO and head of international sales Christian Scherer […] The question is particularly relevant for EU development cooperation, which seems to have been erased from the picture – or at least not explicitly mentioned. One could argue that some of the merged instruments already have a strong development component and that the latter would, thus, be preserved throughout the new instrument. The A380 is about 4x more expensive to operate per flight hour than a 777 ($25,000+/hr vs. $7,000/hr), requires the plane to be full, and has double the engine Mx.
2021.12.09 00:21 Richdem68 A32NX EFIS - Spad Next Question
I have a Saitek Radio Panel and would like to utilize if possible one of the rotary controls to change the mode selector and range adjustment on the EFIS panel in the FBW A32NX. Does anyone know if there is a mapping within SpadNext to allow the inner & outer rotary control to adjust these ? If so how would it be set in Spad Next to do this?
I have looked but cannot for the life of me find anything that looks remotely close.
Thanks in advance
submitted by Richdem68 to MicrosoftFlightSim [link] [comments]
2021.12.09 00:21 Complete-Bit-6382 What is something that’s popular and annoys you?
2021.12.09 00:21 Tenacious_Jey Sasha Banks
|submitted by Tenacious_Jey to WrestlingAndMMABabes [link] [comments]|
2021.12.09 00:21 Maximum-Student2749 Extreme urge to nest at 34 weeks
I've just had this extreme urge to suddenly nest and get all the things ready for the baby and my toddler. Maybe it's because I realize I am so close to having this baby that I need to check the extra things off my list like washing swaddles and onesies. I even organized my son's entire room to add the baby clothes back (they will share a room at some point).
My thought is though, if I am feeling this extreme urge to nest does it mean labor is near? I don't remember this with my first baby as I was induced at 37 weeks. Something in me feels like the baby will be here soon. Has anyone else had a similar experience?
submitted by Maximum-Student2749 to pregnant [link] [comments]
2021.12.09 00:21 AndiBoiiiiiiiiiii He Cute
2021.12.09 00:21 GarretWith1T First Official Promo for The Amazing Race 33
|submitted by GarretWith1T to TheAmazingRace [link] [comments]|
2021.12.09 00:21 businessyndicate Great Resignation shows little letup as Americans quit jobs at near-record pace in October; openings surge near all-time high
|submitted by businessyndicate to businesstalkdaily [link] [comments]|
2021.12.09 00:21 doggodoesaflipinabox [USA-NY] [H] PayPal [W] Intel Compute Card (m3/i5) and Intel Compute Dock
I'm looking for one of these rare computers: https://www.intel.com/content/www/us/en/compute-card/compute-card-brief.html
SKUs: CD1M3128MK (m3), CD1IV128MK (i5), DK132EPJ (dock)
Pretty small, card-sized, needs to be in a dock to work. Unfortunately, they're not common enough to be as cheap as their specs imply, and the minimum price for a Core m3 card on eBay is $300 (lol). If you have one of these cards and docks and can offer them for a more normal price, I'd love to have it.
submitted by doggodoesaflipinabox to hardwareswap [link] [comments]
2021.12.09 00:21 YopangilaFarm Karma for karma
2021.12.09 00:21 Thunder_play4 i had a test and this was a question
|submitted by Thunder_play4 to ihadastroke [link] [comments]|
2021.12.09 00:21 toiet_moi PHILIPPINES: Boosting Private Sector Growth Can Strengthen Recovery, Create More Jobs | World Bank
|submitted by toiet_moi to Philippines [link] [comments]|
2021.12.09 00:21 plzsendhelpomg Thredup partnership program gift card deducted AFTER taxes. First time using this. Is this normal??
2021.12.09 00:21 Greedy_Strategy_3729 How much longer should I go?
So over this past year I’ve gotten extremely consistent with my golf game. Been gaming my dads 23 year old clubs but it’s funny going to the range and still hitting the ball farther than anyone with ease. I’m 6”5 and my current clubs are out dated and way to short for me. Since the holidays are coming up, I’m gonna treat myself to a newer set of clubs. Just wanting to know if I should go 1 inch longer or 1.5 inches longer? I know this change will be dramatic but I’m looking forward to putting in the time to get accustom to longer clubs. Thank you in advance for your help
submitted by Greedy_Strategy_3729 to golf [link] [comments]
2021.12.09 00:21 -MercuryOne- Use MercuryOne if you need a referral code, member since July 2019, KYC verified, always active and available for help.
|submitted by -MercuryOne- to PiNetworkReferrals [link] [comments]|
2021.12.09 00:21 malsan_z8 Beginner here - Does it take longer to develop shoulders than other areas?
Both my standing overhead barbell presses and lateral dumbbell raises seem to stay steady at the weights I’ve been lifting for them, at least for some time. Does it take some time for this, or perhaps am I doing them wrong / should switch the workout I do?
submitted by malsan_z8 to GYM [link] [comments]
2021.12.09 00:21 aargames Taxi drivers of Reddit, what are your thoughts when someone says "follow that car"?
2021.12.09 00:21 businessyndicate Nike will stop selling sneakers at one of America's largest shoe chains
|submitted by businessyndicate to businesstalkdaily [link] [comments]|
2021.12.09 00:21 Edawg661 So if there 5.2 million shares registered, and Ryan Cohen has, like 9 million shares, where are his shares held? A broker? Just curious if anybody would know. Maybe somebody has asked already. Just curious.
I don’t think he got shares as a stock option, but bought a block of shares outside of employment with the company. I don’t know if his shares are being lent, but it would still be cool as hell if RC ends up tweeting an epic purple ring for all 9 million of his shares.
submitted by Edawg661 to Superstonk [link] [comments]
2021.12.09 00:21 Ben0verbiche Propertarian Capitalist Thinks he knows the US Constitution (Guess which sub)
|submitted by Ben0verbiche to EnoughLibertarianSpam [link] [comments]|
2021.12.09 00:21 FBBLUVER Aspen Rae
|submitted by FBBLUVER to offseasonthickness2 [link] [comments]|
2021.12.09 00:21 Ranunix Newbie to piercings (care advise)
Hi! I’ve recently gotten my ears pierced (lobes) two months ago. My healing process was fine until about 5-6 days ago. I’ve started bleeding a little bit from the front of the hole whenever I take my earrings out to shower. This polymer clay and I don’t want to ruin the adhesive.
This pair has a notch on the pole for extra security, so the butterfly is a bit harder to get off. Which I think may have lead to the irritation, then led to bleeding.
I was wondering if anyone could calm my nerves about it being infected/give care advice. I know I’m not supposed to put hydrogen peroxide near the area or tea tree oil, but I feel lost as to how to fix it then.
I would be extremely grateful to any solutions. I’ve wanted to have my ears pierced for a while and I don’t want to have to let them close because of a potential infection.
submitted by Ranunix to piercing [link] [comments]
2021.12.09 00:21 Taka_no_Yaiba This user drew Lollypoppy x Sona Mashup
|submitted by Taka_no_Yaiba to PoppyMemes [link] [comments]|
2021.12.09 00:21 IAmTheTrueM3M3L0rD Well worth the money for this game, definitely picking up the dlc when I can
2021.12.09 00:21 Emotional_Baseball_4 Guys I have a OnePlus 8T n I see YouTube is there an option to have the picture straight to corner?
|submitted by Emotional_Baseball_4 to FortNiteMobile [link] [comments]|
2021.12.09 00:21 ZombotanyGaming Uh mods?????
|submitted by ZombotanyGaming to okbuddyzomboss [link] [comments]|